Introduction
The NuCOAT 3310 I* Adhesive is a finish for NuMPF 5110 F to 5190 F Systems (MPF Systems) and can also be used to seal formwork as well as to caulk penetration assemblies.
* Also named “75.A”
Product Data
- Silicone adhesive with acetic acid curing
- Waterproof and air-tight
- Can be decontaminated
- Resistant to aggressive waters and liquids
- Radiation-resistant (NFT 30 903)
- Resistant to accident conditions (temperatures, pressure – NFT 30 900)
Operational Information
- To be used on clean, dry and degreased surfaces
- Manual application with a cartridge gun
- Setting time: Approx. 1 min 30 s
- Lamination time: Approx. 5 min (at 20°C / 68°F – 65% RH)
- Complete cross-linking: 24 hours
Other Technical Information (Packaging, Storage)
- 310 mL cartridge packed x25 in a box
- Storage temperature: 5°C to 50°C (40°F to 120°F)
5°C to 50°C (40°F to 120°F). Renewable 2 x 6 months. Important: The cartridges must be disposed of twenty-four months from the production date.
ADDITIONAL INFORMATION
- Waterproof and airtight
- PMUC No. ("Produits et Matériaux Utilisables en Centrale"—an accreditation by EDF for use in nuclear power stations): 24008
System Options
References
- 2010 - Sealing of the DVF ducts (Electrical building smoke exhaust system)—CNPE Gravelines (France): 840 cartridges
- 2010 - Sealing of the penetration assemblies and cable trays - Ning De 1 & 2 / Lingao 3 & 4 / Hung Yan He 1 to 4 Nuclear Power Plants (China): 15,725 cartridges
- 2010 - Installed on cable trays—Qinshan 3 & 4 Nuclear Power Plants (China): 1,775 cartridges
