Introduction
The NuPLUG 2140 R* Foam is a flexible product used as both a radiological barrier and as fire break to caulk electrical and mechanical penetration assemblies, in addition to sheaths cast in both concrete slabs and walls.
* Also named 935.BC
Product Data
- Bi-component silicone foam
- Shielding factor for gamma radiation, X-rays and neutrons equivalent to that of concrete
- A flexible product that makes it possible to insert extra penetration modules in penetration assemblies that have already been caulked
- Acts as a fire break for up to two hours (EI 120) (Tested according to the 2004 French decree and the EN 1366-3 standard)
- Product used for caulking penetration assemblies with a saturation level of sixty percent
- Product can be imbued with sealant and decontaminable properties if coated with a paired MECATISS product such as NuCOAT 7110 I (SILCO Fabric) or NuCOAT 3110 I (TSR 750)
Operational Information
- Minimum thickness: 150 mm
- To be used on clean, dry and degreased surfaces
- - 3 possibilities for implementation:
o Pneumatic pump (for large volumes)
o Manual or pneumatic caulking gun (for the filling of small volumes)
o Manually, through the use of gravity (for easily accessed volumes)
- Setting time: < 15 min
- Complete cross-linking: 24 hours
- End product density (polymerised): 2.4 to 2.6
Other Technical Information (Packaging, storage)
- Four container kit:
o NuPLUG 2140 R (A): Coated metal bucket
o NuPLUG 2140 R (A reagent): Plastic bucket
o NuPLUG 2140 R (B): Coated metal bucket
o NuPLUG 2140 R (B reagent): Plastic bucket
- Storage temperature: 5°C to 50°C (40°F to 120°F)
- Shelf life of the kit is 1 year from the production date, renewable for 2 x 6 months, in their hermetically sealed original containers
ADDITIONAL INFORMATION
- Shielding factor for gamma radiation, X rays and neutrons equivalent to those of concrete
EI 120 (two-hour fire break) for a width of 150 mm
- PMUC No. ("Produits et Matériaux Utilisables en Centrale" – an accreditation by EDF for use in nuclear power stations): 24069
- Pressure resistant up to 0.3 bar when coated with a complementary MECATISS product such as NuCOAT 7110 I (SILCO Fabric) or NuCOAT 3110 I (TSR 750)
References
No reference for this product to date.
