Introduction
The NuTRAY 4120 F* System is a set of castings made at the factory and ready to be used on-site.
* Also named "Protection provisoire de chemins de câbles"
Product Data
- Intumescent castings
- Acts as a fire break for up to one and a half hours depending on configuration
- Intumescent product that swells as a result of heat exposure to temperatures exceeding 110 °C
(230 °F)
- Resists to freeze down to minus 50°C (minus 59°F)
- Can be installed or removed in just a few minutes
- Thermal conductivity at 40 °C (104 °F): 0.257 W.m-1.K-1
Operational Information
- The two parts of the protection module are fitted around the cable trays to be protected and the whole set is then fastened with retainer flanges
- Density: 1 to 1.2
- Minimum thickness: 30 mm
- Custom-sized
Other Technical Information (Packaging, Storage)
- In boxes and on palettes
- Storage temperature: 5°C to 50°C (40°F to 120°F) in a dry and ventilated area
- Product shelf life: Unlimited
ADDITIONAL INFORMATIONS
- Acts as a fire break for up to one and a half hours depending on configuration
System Options
References
- 2006—CNPE Gravelines (France): Ten temporary cable tray protections
