Product - MPF.2000

MPF.2000 Mecatiss Products

Description : System MPF.2000 is a flexible, water-tight and air-tight fire barrier, adaptable to most shapes. Used to protect cable trays, ventilation and smoke-control ducts, ceilings, walls and casings.

Characteristics :
Fire-barrier up to 3 hrs depending on configuration and qualification criterion.
Watertight and airtight.
Easily decontaminated and washable.
Highly flexible and adaptable to all shapes. Lightweight compared to
a rigid similar protection system.
Quick and easy installation.
System is compressible to fit exiguous available space.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68
Fax : +33 (0)4 74 80 34 48

Product - Temporary cabletrays protection

Temporary cabletrays protection

Description: Intumescent removable fire-barrier device. Supplied on-site as preformed ready-for-use shells.

Used mainly as temporary protection for cable trays.

Characteristics:
Fire-barrier up to 90 min depending on configuration.
Heat intumescent at 110°C and over.
Frost-proof up to – 50°C.
Installation and removal requires only a few minutes

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

 

Product - MP2 neutron-gamma radiation shielding

MP2 Mecatiss protection

Description: Combined neutron-gamma radiation shielding material with fire-barrier properties.

Factory-made by compressing together a mix of iron powder and resin-based bonding agents.

Implemented as filler-material for casings.

Characteristics:

MP2 Fire-barrier protection

- Material for use preferably in casings.
- Attenuation of gamma radiations
- Fire-barrier 2 hrs.
- System compatible with washable paints

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - Elastojoint

ELASTOJOINT Mecatiss Products

Description: ELASTOJOINT is a silicone elastomer fire-barrier system used for sealing inter-building seals or wall and floor-mounted expansion joints.

Characteristics: Fire barrier 2rs to 4 hrs depending on width and orientation (wall and floor), tested according to European standard NF EN 1366-4.
Satisfactory bonding on mortar, concrete, steel.
Up to 25% strain strength. Quick and easy implementation. Self-smoothing and shaping to fit allotted space.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - DURABLOC.MB

DURABLOC Mecatiss Products

Description: DURABLOC-MB is a single-block multilayer panel used for erecting walls, floors or fire-barrier casings.

Characteristics: Rigid, free-standing panel.
Fire barrier up to 2 hrs. Possible interface with system MPF.2000 and venting 335.S.
Resistance to radiations (NFT 30 903) and accidental conditions (temperature, pressure NFT 30 900).

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68
Fax : +33 (0)4 74 80 34 48 

Product - Expansion joint 200

EXPANSION JOINT 200 Mecatiss Products

Description: The Expansion joint 200 is a fire barrier used for the protection of mechanical penetrations made of composite piping with a 200 mm diameter and a 25 mm displacement allowance.

Characteristics: Fire-barrier up to 2 hrs depending on configuration. Water tight up to 0,15 bar. Allows a 25 mm pipe displacement without impact on penetration leaktight and fire-barrier properties. Installation on existing pipes by cold junction.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - Gravel box stop oil fire propagation

GRAVEL BOX Mecatiss Products

Description: Device preventing oil fire propagation in concrete trenches between CVCS pumps room and adjacent areas.

Characteristics: Fire barrier 90 minutes.
Prevents fire propagation between two rooms.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68
Fax : +33 (0)4 74 80 34 48 

Product - MSC.55

MSC.55 Mecatiss Products

Description: Mortar MSC.55 is a fire-barrier sealing product designed for electrical penetrations, mechanical penetrations, and sheaths or sleeves in walls and floors.

Characteristics:
Fire-barrier up to 3 hours depending on configuration (tested as per European standard EN 1366-3).
Leaktight and decontaminated if treated with
MECATISS leaktight coating such as TSR.750,
75.ND, 75.N or SILCO weave.
Pressure-resistant up to 1,4 bar.
A spacer can be fitted when applying the mortar to
allow future routing of feedthroughs.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - 335.S Linear Vent fire-barrier

335.S Mecatiss Products

Description : The 335.S Linear Vent ensures ventilation of systems on which it is installed in normal operating conditions and acts as a fire-barrier in accidental fire conditions. It is adaptable to all MPF systems, and MSCP type casings and doors.

Characteristics:
Fire-barrier up to 2 hrs depending on configuration.
Removal of power cables overheat up to 50 W/ml.
The linear vent is factory-made and can be fixed on cable trays, casings and fire doors.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - 935.P

935.P Mecatiss Products

Description : Silicone foam 935.P is a fire-barrier product used as a radiological shield against ionizing radiations. The foam is used to seal electrical and mechanical penetrations, sheaths, in walls and floors.

Characteristics:
Attenuation of gamma- and X-rays. (attenuation
factor similar to concrete)
Fire-barrier up to 3 hrs.
Flexible material allowing the routing of additional
feedthroughs in a pre-sealed penetration.
Easy decontamination and leaktight if covered with
MECATISS products such as SILCO weave, 75.A,
TSR.750.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - 935.C

935.C Mecatiss Products

Description: Silicone foam 935.C is a flexible fire-barrier sealing material.
It is used to seal electrical penetrations, mechanical penetrations and sheaths, in walls and floors.

Characteristics:
Fire-barrier up to 3 hrs depending on configuration (tested as per European standard EN 1366-3).
Flexible material allowing the routing of an additional feedthrough in a pre-sealed penetration.
Leaktight and easily decontaminated if surface-treated with MECATISS sealing product such as TSR.750, 75.ND, 75.N or SILCO weave.
Resistance to accidental conditions (French LOCA 2007).
Choice of two colours: black and white.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - 935.BW

935.BW Mecatiss Products

Description: Silicone foam 935.BW is a fire-barrier product used as a radiological shield against ionizing radiations.
The foam is used for sealing electrical penetrations, mechanical penetrations, wall and floor sheaths.

Characteristics:
Attenuation of Gamma- and X-rays (attenuation
factor similar to concrete)
Fire-barrier up to 3 hrs. (tested as per European
standard EN 1366-3)
Flexible material allowing the routing of an additional
feedthrough in a pre-sealed penetration.
Possible repair on sealed penetrations using leadcharged
foam.
Leaktight and easily decontaminated if surfacetreated
with MECATISS sealing product such as
SILCO weave, 75.A, TSR.750.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48 

Product - 75.ND-M

75.ND-M Mecatiss Products

Description: Silicone elastomer 75.ND-M is a derivative product of 75.ND silicone, with higher elastic and resilience properties. It can also be injected in submarine environments.
Its main applications are for:
- expansion joints.
- sealing of mechanical & electrical penetrations and wall or floor sleeves.

Characteristics:

75 ND M Protection

Fire-barrier up to 6 hrs depending on configuration (tested as per European standard EN 1366-3).
Leaktight to water steam up to 100°C during 100 hrs.

Leaktight to water & air, resistant to hydrocarbons.
Possible injection in salted water environments.
Possible decontamination.
Self-smoothing and adaptable to all shapes and formworks.

75.ND-M

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68
Fax : +33 (0)4 74 80 34 48 

Product - 75.ND

The silicone elastomer 75.ND 75.ND is a product Fire waterproof, air and hydrocarbons. These many qualities allow it to be used in several application areas: Caulking and / or sealing surface of the hopper. Expansion joint. Product filler for concrete cracks. Features: Adheres to all media types. Decontaminated. Self-leveling. Accident conditions (APRP 2007)-Waterproof, air, hydrocarbons. Fire from 1:30 to 3 hours depending on configuration according to European standard (EN 1366-3). Resistant to 14m of water column pressure up to 25m in 14mCE up against pressure. Especially recommended for caulking of saturated cable crossings. Good chemical resistance, mechanical stress. Implementation: The elastomer 75.ND comes in the form of three buckets homogenized (75.ND (A), 75.ND (B) and Cata 75.ND), following this manipulation we get the finished product and useable under 2 hours . Cleft concrete Joint Treatment & Fire watertightness and air Mechanical treatment of crossings Treatment of electrical penetrations saturated or unsaturated Example of application of a joint junction in pipe 75.A single component silicone adhesive sealing air & water, fabric collage SILCO on itself, on concrete, metal, paints ... 75.N-component silicone sealant Airtightness & water, expansion joints up to 300% Elastomer siliconne 75.ND bicomponent Airtightness & water, hydrocarbons. up to 25 meters of water column. expansion joints Firewall up to 6 hours Elastomer-M siliconne 75.ND bicomponent Firewall & Airtightness & water, saline water, hydrocarbons. up to 25 meters of water column. expansion joints. Injection in the underwater Implementation of 75.ND & M-75.ND: Manually gravity. Gun injection (cartridges). Injection pump Tightness 75.A flexible sleeves, Treatment 75.N electrical penetrations Treatment 75.N flexible sleeves Treatment 75.ND electrical penetrations Treatment 75.ND crossings Mechanical Treatment 75.ND-M joints of pipes in the underwater Treatment 75.ND-M joint fire & water tightness and air Injection of the underwater seal at the pump hydrocarbon

75.ND Mecatiss Products

Description: Silicone elastomer 75.ND is a fire barrier material leaktight to water, air and hydrocarbons. 75.ND is a multi-purpose compound usued in various fields of application:

- Pluggings and/ or sealing of openings.
- Expansion joint.
- Crack plugging material in concrete constructions.

Characteristics:
Le 75.ND is specially recommended for sealing cable-saturated electrical penetrations. Self-smoothing, adaptable to all types of formworks.
Bonding on all types of backing.
Fire-barrier up to 3 hrs depending on configuration (tested as perEuropean standard EN 1366-3).
Leaktight to water, air and hydrocarbons.
Possible decontamination.
Pressure resistance up to 25 m waterhead, backpressure
up to 14 m waterhead.

More informations : mecatiss@mecatiss.com
www.mecatiss.com
Tèl : +33 (0)4 74 80 01 68 – Fax : +33 (0)4 74 80 34 48